Digital Grill Thermostat Controller Kit Replacement Part for Traeger

• 1x Thermostat Controller Board
• 1x Temperature Probe
• 1x Hot Rod Ignitor
• 1x Fuse
• 5x Fixing Bands

Replacement For All Traeger wood pellet grill models (except PTG).

Good quality: High quality PCBA & High quality aluminum knob for switching models and adjusting temperature.

Easy installation: Plug-in connectors & Plug and play.

Eight cooking Temperature settings: from 180 -375F.

Clear and bright LCD Display shows exact cooking temperature.

Equipped with safety device and automatic cooling function to ensure safety.

High quality PCBA & Aluminum knob for switching models and adjusting temperature.

Monitors real-time inner temeperature and helps maintain more consistent temperatuers.

Ignites the hardwood, making starting your grill as simple as flipping a switch.

• 8 Temperature Settings: Adjustable temperature from 180F to 375F.
• 3 Different Modes: Smoke mode, Temperature mode, Hight mode.
• Clear LCD Display: Shows exact cooking temperature inside your Grill.

1. Unscrew the old panel. Unscrew the bottom screws of the hopper( front and back). Cut all the ties binding the wires. Unplug all the wires. Remove the old panels.
2. Feed the RTD wires through the holes on the left side of the grill into the bottom of the hopper and into the hole where the panel is supposed to be attached and screw RTD wires to the green terminal block.
3. Install the RTD (Temperature Sensor ROD) located inside of the grill.
4. Plug all the wires into it proper cable connections.
5. Use zip ties tie to bundle loose cords.
6. Screw on the bottom grate.
7. Screw and tighten the new digital control.

Fault descriptions：

When the control panel displays HEr, the temperature is too high and all devices need to be turned off .

When the control panel displays Er1, the probe is faulty and all devices need to be shut down.

The control panel displays LEr, the ignition rod has been working for more than 20 minutes, and all equipment needs to be turned off, indicating the flameout protection status.

• Compatible with All Traeger wood pellet grill models (except PTG).
• Eight cooking temperature settings from 180 to 375 degrees Fahrenheit. Clear and bright LCD Display shows exact cooking temperature.
• Come with 7 inch RTD temperature sensor and hot rod igniter. Easy installed with standard plug-in connectors.
• With 3 different modes: smoke mode, temperature mode and high mode. Special smoke mode allows to control speed of feeding and low temperature smoking.
• Multifunction control with cooling cycle function for safety use and succulent barbecue.